MedFirst Medical Alert Features and Options

Medical Alert System Features and Options

Standard Fixed Operation for the MedFirst Medical Alert System

No transmitter loaded notification. The MedFirst Alert system checks the alarm system memory for a transmitter key code. If no transmitter is loaded the medical alert system will report this to our central monitoring station.

Programmable Options

Power Failure reporting: When the power has
been OFF for 1 to 2 hours our medical alert system will contact the
central m0nitoring station and report power failure. Once the system
has reported the power failure when the power returns and has
been on for 1 hour the medical alert system will call and report that the
power has been restored.

Automatic check In:
Our medical alert system will automatically
call the monitoring station at fixed intervals. This automatically verifies to the central monitoring station that the console and telephone lines are working. The medical alert system can be set to a period from 1 to 7 days, or 2 or 4 weeks.

Console Transmitter Test. When enabled the user
can press the GREEN Power/Reset button and within the next
5 seconds activates the transmitter. The medical alert system will call the
central monitoring station and report a test code to verify operation. It
is a way to completely test the system without sending an emergency report.

Inactivity Reporting: Time intervals can be set to
OFF, 12, 24, 36 or 48 hours. If the medical alert console is not reset,
activated, or does not receive a signal from an activity detector
motion sensor within the programmed period the system will
call and report inactivity. The console buzzer will sound a
warning sound in advance to remind the user to reset the

Voice operating modes:
The medical alert system can be
programed to enable or disable 2 way voice. If voice
operation is turned OFF, the medical alert system will automatically reset
when the digital portion of communication with our central monitoring
station is complete.

When voice is enabled most systems are programed
to switch to voice in the standby mode where neither party can
hear the other and waits for the operator to turn on the voice.

Other modes are programmable.
Voice can be opened in either
the microphone or speaker mode or in microphone only mode
for silent operation.

Silent Buzzer.
The buzzer Can be turned OFF so
there is no buzzer during emergency calls. The RED Emergency
button will flash.

The MedFirst medical system is easy to use and setup takes less than 5 minutes.  All of the features and benefits described above are preset before they arrive to our customers.

Independence and peace of mind is so important to the seniors who use our system and that’s why our medical alert systems are engineered to exacting standards. If you ever have a problem with one of our medical alert systems, we will replace it free of charge.  Your safety and security is our commitment to you.  Order your medical alert system today from MedFirst Alert.

Speak Your Mind